Salpre Box Setup

Updated on September 24, 2025

Salpre Box – Configuration Guide

This guide walks you through the setup and configuration of your Salpre Box step by step. Follow the instructions below to connect your device to Wi-Fi, assign an AI Agent, and enable Bluetooth pairing.

Step 1 – Add Device

  1. Open the My Devices section in the app.
  2. Click “Add Device”.
  3. Select your Salpre Box from the list of available devices.
    • Example: SALPRE_DD2FA1D8
  4. Click the Wi-Fi SSID field to continue.

Step 2 – Configure Wi-Fi

  1. Select your Wi-Fi network and type your password.
    • Then click “Configure”.
  2. If the password is correct, you will see a success message:
    • “Device WiFi Connection Successfully!”
    • Click “Take me to Dashboard.”
  3. From the dashboard, select an AI Agent to connect with your Salpre Box.
    • Set it as the default AI Agent.
    • Click “Save” to confirm.

Step 3 – Bluetooth Connection

  1. On your phone, go to Settings → Bluetooth.
    • Locate and select your Salpre Box device.
  2. When prompted, click “Allow” to enable contact and call sync.
  3. If a device type is requested and not auto-selected, choose Headphone.